IC-M510E VHF/DSC Fixed Mount Marine Radio with Smartphone Control

The IC-M510E is a stylish, new advanced VHF/DSC marine radio from Icom that gives you control of the radio via your Smartphone using the RS-M500 app (iOS™/Android™). In fact up to three smartphones can act as remote controllers via the radio’s WLAN network. It is even possible to have intercom function between your smartphone and the radio itself.

Radio Control & Intercom Via Your Smartphone
Use the RS-M500 app (for iOS™/Android™) to remotely control the IC-M510 through WLAN. Up to three smartphones can be used as a wireless microphone or remote controller in substitute for the COMMANDMIC™. Intercom function between your smartphone and the radio is also available.

Stylish, Sleek Design
The IC-M510E is slim (depth: 71.2 mm; 2.8 in) and easy to install in your boat. Its all-new sleek design is suitable for either panel or trunnion mounting.

Wide Viewing Angle Colour TFT LCD
The colour TFT LCD provides nearly a 180-degree viewing angle. The wide display has high-resolution characters and function icons. The night mode screen ensures good readability in low light conditions.

Simplified Navigation Function
The Navigation function guides you to a specified waypoint or AIS target. You can assign up to 100 destinations as waypoints.

Provides Clear, Loud Audio
The IC-M510E’s internal speaker enhances the received audio. The waterproof speaker provides superior sound quality with a wide frequency range for powerful, clear audio.

Interface Box for NMEA 2000™ and Hailer (Available in 2022)
The optional CT-M500 wireless interface box provides NMEA 2000 connectivity and Hailer/PA feature. The CT-M500 and the radio can be connected through WLAN.

And more

• NMEA 0183/-HS connectivity
• Integrated GNSS receiver (GPS antenna is switchable between internal and external)
• IP68 advanced waterproofing (1 m depth of water for 60 minutes)
• Automatic Foghorn function
• Optional UT-112A voice scrambler
• AquaQuake prevents audio degradation from a water-logged speaker
• Supplied HM-205RB speaker microphone can be connected to the rear panel
• External speaker connection
• Controlled by HM-195GB COMMANDMIC
• Supports 4-digit channels

SPECIFICATIONS

GENERAL

• Frequency range: TX 156.025–161.425 MHz | RX 156.300–161.925 MHz | DSC 156.525 MHz | AIS1 (only for version with AIS) 161.975, 162.025 MHz
• Usable channels: INT, USA, ATIS (depending on the transceiver version) channels
• Type of emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0G2B (AIS) – AIS version only
• Power supply requirement: 13.8 V DC (10.8–15.6 V DC)
• Current drain: TX 25 W output: 5.0 A | RX Max. audio: 4.0 A (with HM-195)
• Operating temperature range: –20°C to +60°C; –4°F to +140°F
• Antenna impedance: 50 Ω
• Weight (approximate): 750 g (not including microphone)

TRANSMITTER

• Output power (at 13.8 V DC): 25 W, 1 W
• Max. frequency deviation: ±5 kHz
• Frequency error: ±0.5 kHz
• Spurious emissions: Less than 0.25 μW (at 25 W)
• Residual modulation: More than 40 dB
• Adjacent channel power: More than 70 dB

RECEIVER

• Sensitivity: (at 20 dB SINAD) –5 dBμ | DSC (1% BER) –1 dBμ emf
• Adjacent channel selectivity: More than 75 dB | DSC (1% BER) More than 73 dBµ emf
• Spurious response: More than 75 dB | DSC (1% BER) More than 73 dBµ emf
• Intermodulation: More than 75 dB | DSC (1% BER) More than 68 dBµ emf
• Hum and noise: More than 40 dB
• Audio output power (at 10% distortion): 15 W typ. with a 4 Ω external speaker

Wireless LAN

• Wireless LAN standard: IEEE802.11 b/g/n
• Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES)
• Channels: 1 to 13 (2.4 GHz band) may differ depending on the country of use
• Output power: Less than 10 mW/MHz

Supplied accessories:

• Speaker-microphone, HM-205RB
• Microphone hanger
• DC power cable
• Mounting bracket kit

To download the files simply click on the desired files to select and then click the Download button at the bottom .

800x600

ic_m510e_1.pdf