Marine Systems > Electronics > NMEA NETWORK > NMEA Network Accessories
A2K-TDC-4M Trunk and Drop Lite Cable
A2K-TDC-4M Trunk and Drop Lite Cable

A2K-TDC-4M Trunk and Drop Lite Cable

€ 67,99 (vat incl.)

€ 55,28 (vat not incl.)

Manufacturer: Actisense

Part Number: A2K-TDC-4M

Our Ref.: 115024

Pre-assembled NMEA 2000 Lite cable saves you time on your installation with ‘plug & play’ installation.

Available in various lengths, the cable assemblies can be used as either drop cable* from an NMEA 2000 backbone or to extend the length of the backbone cable.

Actisense Lite cable assemblies allow quick installation and come with a quality reassurance, as only the Actisense UL certified cable is used.

NMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.

NMEA 2000 Lite cable can be used to create a backbone up to 100 meters in length. If the backbone length required exceeds 100 meters, the center of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.

The maximum permitted length of a drop cable (distance from the backbone) is 6 meters. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 meters.

Technical Specification

Electrical

  • Rated Current: 4A
  • Rated Voltage: 60VDC

Mechanical

  • Male Contact: Brass, gold plated
  • Female Contact: Phosphor bronze, gold plated
  • Contact Carrier: PBT, black
  • Contact Polarization: Standard M12 - “A”- polarization
  • Mating Thread: M12
  • Screw Cap: Brass, nickel plated
  • O-Ring Seal: Rubber, black
  • Housing: PVC, black
  • Power Pair: 22 AWG (19 strand tinned copper)
  • Data Pair: 24 AWG (19 strand tinned copper)
  • Drain: 22 AWG (19 strand tinned copper)
  • Braid: 37 AWG (tinned copper)
  • Jacket Material: 0.8mm Nom. PVC, black
  • Jacket Outer Diameter: 6.85mm ±0.254mm

Approvals and Certifications

  • Protection: IP67 (when mated)
  • Operating Temperature: -20°C to +70°C
  • Storage Temperature: -40°C to +85°C
  • NMEA 2000 Approved
  • RoHS Compliant
  • UL Certified (E137250), (UL1277)
Information request
*
*
*
*
I would like to receive the newsletter
I have read and accept Privacy Policy
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

No records to view

I have read and accept Privacy Policy