IC-F1000T – VHF / PMR Handheld Commercial Transceiver w/ full keypad and display

The IC-F1000T handheld VHF commercial transceiver is a compact portable radio with convenient features such as a built-in motion sensor, channel announcement function, loud audio and a rugged waterproof & dustproof chassis. The radio is ideal for a wide range of businesses such as those involved in the education, hospitality, retail, and facility management sectors.

IP67 Waterproof and Dust-tight Protection

The IC-F1000T has a 24.5mm slim depth with IP67 waterproof casing. The transceiver can withstand 1m depth of water for 30 minutes. Its dust-tight construction prevents the ingress of powder dust, sand, mud and other objects.

Built-in Motion Sensor

With a built-in motion sensor, the IC-F1000T can detect its position, state of motion and non-motion and can send an emergency signal. The motion function detects if the transceiver is moving or shaking, for example, during a chase. Lone worker and man down functions are programmable.

Easy to Hear in a Noisy Environment

The large speaker of the transceiver provides clear compounded 1500mW audio. The built-in BTL amplifier doubles the audio output power and delivers loud and intelligible voice to a radio operator working in noisy environments.

Inversion Voice Scrambler

The built-in inversion voice scrambler provides secure conversation. Up to 16 codes are selectable.

14 Hours of Operating Time with Supplied Waterproof Battery

The supplied waterproof Li-Ion battery pack, BP-279 (7.2V DC, 1485mAh), provides 14 hours of operating time.

Quiet Stand-by and More

The IC-F1000T has built-in 2-Tone, 5-Tone, CTCSS and DTCS signaling capabilities for group communication and selective calling.

Channel Announcement

When you rotate the channel knob, the radio announces the channel number. Convenient for making radio adjustments without having to look at the radio.

Other Features

• 8 DTMF autodial memories
• BIIS PTT ID and emergency call
• “Shift key” function increases number of programmable key assignments
• Surveillance function
• Escalating alarm
• Optional HM-168LWP, waterproof speaker-mic

SPECIFICATIONS

GENERAL

• Frequency coverage: 136–174 MHz
• Number of channels: 16 channels
• Type of emission: 16K0F3E/14K0F3E/8K50F3E (EUR)
• Power supply requirement : 7.5V DC nominal
• Current drain: Tx: 1.3A | Rx: 500 mA /77 mA (Max. audio (internal SP)/Standby)
• Antenna impedance: 50Ω
• Operating temperature range: –25°C to +55°C
• Dimensions (W × H × D; Projections not included): 52.2 × 111.8 × 24.5 mm (With BP-279)
• Weight (approx.): 240 g; 8.5 oz (With BP-279)

TRANSMITTER

• Output power (Hi, L2, L1): 5 W, 2 W, 1 W
• Maximum frequency deviation: ± 5.0 kHz (25 kHz), ±4.0 kHz (20 kHz), ±2.5 kHz (12.5 kHz)
• Spurious emissions: 70 dB minimum (USA/EXP) | 0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) (EUR)
• Frequency stability: ±2.5ppm
• Audio harmonic distortion : 1.0% typical (25/20 kHz), 1.5% typical (12.5 kHz) (at AF 1 kHz 40% deviation)
• FM Hum and Noise (without CCITT filter): 46 dB typical (25 kHz), 40 dB typical (12.5 kHz)
  (USA/EXP)
• Residual modulations (with CCITT filter):
• External microphone connector: 3-conductor 2.5 (d) mm (1/10)/2.2 kΩ

RECEIVER

• Sensitivity: (at 12dB SINAD) 0.25μV typ. | (at 20dB SINAD) –4 dBμV typical emf
• Adjacent channel selectivity: 76 dB typ. (25 kHz), 72 dB typ. (20 kHz), 53 dB typ. (12.5 kHz)
• Spurious response rejection: 70dB minimum
• Intermodulation rejection: 68 dB typical (EUR)
• Hum and noise: (With CCITT filter) 51 dB typical (25 kHz), 45 dB typical (12.5 kHz) | (Without CCITT filter) 52 dB typical (25 kHz), 49 dB typical (20 kHz), 46 dB typical (12.5 kHz)
• AF output power (at 5% distortion): Internal SP 1500 mW typical (With 8Ω load) | External SP 400 mW typical (With 8Ω load)
• External speaker connector: 2-conductor 3.5 (d) mm (1⁄8)/8 Ω

To download the files simply click on the desired files to select and then click the Download button at the bottom .

1200x900

1200x900