7702 - ML-RBS 500A Remote Battery Switch with Manual Control, 24V DC

Blue Sea Systems designed the ML-Series heavy duty remote battery switch to make controlling large battery banks push-button convenient. Because of their size and cable requirements, conventional battery switches are typically located in lockers, or behind a seats and are difficult to access.

Installation of a remote switch has two benefits: it puts the control of the switch right on the dash or nav-station and it shortens heavy cables runs by putting the switching mechanism close to the battery. Included is a Contura style switch that requires only light gauge wire and will easily fit next to (if not match) other dash mounted switches. A sliding cover on the remote switch prevents accidental switching.

The ML-RBS switching mechanism can be mounted close to the batteries to limit heavy gauge cabling. For added safety a manual control lever with lock out feature has been built into the ML series switches; you will always be able to control the battery even if the wiring to the dash mounted switch is compromised. The service lock-out offers a level of safety when working on the electrical system. Ideal for multiple helm applications.

Key Features

• Included SPST Contura styled remote switch (Blue Sea Systems 2155) makes battery switching as easy as pushing a button
• Ideal for boats with multiple stations that require battery control at each helm
• 500A capacity is able to manage large battery banks
• Manual operation possible if power is not available
• Service lock-out to prevent accidental current flow while working on electrical system
• LED output in switch allows switch state indications (requires optional LED panel)
• Label recesses for bank identification
• 3/8" Tin-plated copper studs for maximum conductivity and corrosion resistance.
• Silver alloy contacts are very reliable for switching large loads
• No parasitic draw while not actively switching
• Can be used with MV-ACR to improve battery management features
• Ignition protected for use in engine rooms of gasoline powered boats
• Lifetime warranty

SPECIFICATIONS

• Control Circuit Connection: Tinned wires
• Nominal Voltage 24V DC
• Manual Control Yes
• Coil Function Bi-Stable
• Mounting: #10
• Amperage Operating Current: 0mA @ 25°C nominal VDC
• Amperage Operating Current when changing state: <4A (40 ms)
• Terminal Stud Torque: 140 in-lb (15.82 Nm)
• Control Circuit Voltage: 20.2 to 32.9V DC
• Continuous Rating: 500A
• Intermittent Rating: 700A (5 min)
• Cranking Rating 30: 1450A DC
• Minimum Operating Temperature: -10° C
• Maximum Operating Temperature: 50° C
• Cable Size to Meet Ratings: 2x (4/0)
• Live Current Switching: 300A @ 12V DC 10,000 Cycles
• Master Control Switch Capability: No
• Mechanical Endurance: 100,000 Cycles
• Terminal Ring Diameter Clearance: 1.18in (29.97 mm)
• Terminal Stud Length: 0.875in (22.23 mm)
• Terminal Stud Size: 3/8" - 16 (M10)
• Weight: 1.75lb (0.79 kg)

To download the files simply click on the desired files to select and then click the Download button at the bottom .

800x600

800x600